7
Operation
Before first Use
Unpack the unit and check it for any damage in transit. Dispose of
packaging materials or store it out of reach of children. Plastic bags etc.
may become a deadly toy for children. Before first use, clean the housing
as described in chapter “Cleaning and Storing”.
Operation
1. Insert the power adaptor into a suitable power socket and connect it to
the socket at the rear of the unit.
2. Turn on the unit with the on/off switch (1). While the unit is turned on
the LED (2) lights up. When the LED (3) lights up and the unit turns off,
the reservoir (4) is full and should be emptied.
3. Simply pull the reservoir from the unit and remove the plug in the rear
left of the reservoir and pour out the water.
Cleaning and Storing
Before cleaning, first unplug the unit. Do not pull the cord to unplug
from the wall socket but grasp the plug itself to unplug.
Do not wipe the unit with aggressive detergents or chemicals in order to
not damage the surfaces.
Wipe the unit with a lightly moistened cloth. Use detergent as needed.
Do not immerse it in water or any other liquid. Dry all parts well before
storing.
Clean the air vents with a brush.
Never try to clean the interior of the unit. Do not open the unit.
Make sure that liquids cannot enter the air vents.
Store the unit heater in a dry place that is protected from dust, dirt and
extreme temperatures.
Store the unit out of reach of children.
