9
Operation
Inserting/Replacing the Batteries
The headlamp is powered by three batteries of the type
LR03 (AAA). The battery compartment is separated from
the lamp on the headband. Replace the batteries when
the light gets weaker.
1. Loosen the locking screw and unhook the battery
compartment cover from the battery compartment.
2. Insert three new batteries of the type LR03 into the
battery compartment. Pay attention to the proper polari-
ty of the batteries. The polarity is printed inside the
battery compartment. Close the battery compartment
with the cover and secure it with the locking screw.
Operation
Use the button on top of the headlamp to turn the lamp on
and off and to cycle through the three operation modes in
the following sequence:
100 % Brightness
→ 50 % Brightness → Flashing → OFF
Adjust the headband to the desired length so you can
wear the lamp conveniently on your forehead.
Tilt the lamp head down to fit your needs according to the
situation.
Zoom Function
To change the zoom angle, slide the forward housing of
the lamp in or out.
