IX
Using
Inserting/Replacing the Batteries
The headlamp is powered by three batteries of the type
LR03 (AAA). The battery compartment is located at the
rear side of the lamp. Replace the batteries when the light
gets weaker.
1. Press with your thumb on
the battery compartment
cover and pull it off in
direction of the arrow.
2. Insert three new batteries
of the type LR03 into the
battery compartment. Pay
attention to the proper
polarity of the batteries.
The polarity is printed
inside the battery compartment.
3. Close the battery compartment with the cover.
Using
Use the button on top of the
headlamp to turn the lamp on
and off and to cycle through
the three operation modes in
the following sequence:
100% Brightness
→
50%
Brightness
→
Flashing Mode
→
Off
