11
Using
Inserting/Replacing the Batteries of the Transmitter
1.
Depress the latch of the battery compartment cover of
the transmitter and remove the cover.
2.
Insert three new batteries of the type LR03 (AAA) (not
included) into the battery compartment (7). Pay atten-
tion to the proper polarity of the batteries. The polarity is
printed inside the battery compartment.
3.
Close the battery compartment with the cover.
Inserting/Replacing the Batteries of the Receiver
1. Press on the corrugated area of the battery compart-
ment cover of the receiver and slide it forwards to open
the battery compartment.
2. Insert two new batteries of the type LR6 (AA) (not
included) into the battery compartment (5). Pay atten-
tion to the proper polarity of the batteries. The polarity is
printed inside the battery com-
partment.
3. Close the battery compartment
with the cover.
Replace the batteries of the
transmitter and the receiver with
new batteries of the same type
and dimensions if the signal is
not transmitted anymore.
Installation
Install the wall mount (11) of the
