12
Using
transmitter at the desired location. The wall mount plate
can be detached from the motion sensor unit for instal-
lation. Tilt the motion sensor (10) so it covers the area
you want to monitor.
Position the receiver at the desired location or hang it
with the loop at the battery compartment on a nail or
screw.
In conclusion test the connection. If no gong signal is
triggered when the motion detector detects motion with-
in its field of view, chose a different suitable location for
the transmitter respectively the receiver.
Selecting the Transmission Channel
In case of interference with e.g. neighbouring wireless
devices, you may need to select a different transmission
channel.
