background image

B E L   1 8 0   S E M I - A U T O M A T I C   R A N D O M   T A P E   S E A L E R

               

3

 

 

Table of Contents

  

 

BEL 180 Main Controls & Function Reference ................................................................. 4 
Connecting Power............................................................................................................... 5 

Electric ........................................................................................................................ 5 
Compressed Air .......................................................................................................... 5 

 

Installing & Removing the Tape Heads.............................................................................. 6 

Bottom Tape Head .......................................................................................................... 6 

Top Tape Head................................................................................................................ 8 

 

Top Tapehead Downward Force [Pressure Regulator] Adjustment ................................... 9 

 

Conveyor Side Force [Pressure Regulator] Adjustment................................................... 10 

 

Feeding Cases to the Machine .......................................................................................... 11 

Automatic Random Case Size Operation ..................................................................... 11 

Self-Adjusting Uniform Case Size Operation – ‘Lock’ Mode ..................................... 12 

 

Troubleshooting Guide ..................................................................................................... 14 

Section 1 - Corrugated Case Quality and Specifications .............................................. 14 

General Taping Conditions........................................................................................... 15 

65-34-5  4/21/10 

Summary of Contents for BEL 180

















Reviews: