Model Select
1/7
Model select
Model
1
Model
2
Model
3
Model
4
Model
5
Model
6
Rename
Copy
Send
Receive
Select
Model
name
Model
logo
Operation
Interface path: WFLY → [General Menu] → [Model Select]
The ET12 can store 30 sets of model data and can flexibly edit the information of the processed data set.
Select:
Select the model to run, click the “Select” button on the right, and the selected model on the left
will turn into a green bottom frame, indicating that the model is successfully selected. The currently running
model (the model indicated by the green box) will be displayed in the main interface.
Rename:
You can rename the selection (the box flashes) The model name is nine characters long and
only supports English naming. Model group.
Copy:
The selected model copies (overwrites) the data of another model to back up the model data, or to
quickly add and configure models that are not very different.
Send:
Share the selected model data. The selected model data is sent to another ET12.
Receive:
The location of the selected model to receive and store model data shared by another ET12.
* Sending and receiving operation distance should be within 0.5 meters.
Model selection example (Switch to the model that needs to be operated):
The selected model becomes a blue bottom frame. Click the “OK” button of the five-way button or touch
the screen to directly click on the model, the selected model flashes, and the right operation option pops up.
Pay attention to the model group name when copying the model to avoid erroneous operations.
The operation of transmitting the model data by the No. 1 remote controller and receiving the model data
by the No. 2 remote controller:
1
No. 1 remote control: Click to select the model group data to be shared (such as “Model 1”), select the
“Send” button displayed on the right interface, click to select “Yes” in the pop-up window, and the model
group data is waiting to be received. .
2
No.2 remote control: firstly select the saved model group position, select an unset model in the left
model list and click, the right interface displays the “receive” button, click, and the prompt pop-up window
selects “yes”. The second remote control starts receiving model group data.
Q W E R T Y U
I
O
P
1
2
3
4
5
6
7
8
9
0
Model 1
OK
@
E xit
-
"
!
M
N
B
V
C
X
)
Z
(
A
S
D
F
G H
J
K
L
Model select
Copy model
Copy
Source
Model 1
Object
Model 2
Send
Receive
Select the model group
for the operation
(
Click to select)
Selected model
selection box flashes
Receiver will flash the checkbox
Model data overlay operation
The transmitter will transfer
the flashing marquee data
Select the
"Send" button
select the
"Yes" button
Select the
"Receive" button
select the
"Yes" button
Click the "Cancel" button to cancel the operation
Wait for the interface process to prompt
"Finish Receiving”
0 0 :00:0 0
Current model
cumulative time
054
General Menu
*Example of model sending function
(Requires two remote controllers of the same version):
The "copy" function, the target
model data is covered by the
reference model data. Please confirm
that the target model data is no
longer needed and then do the copy
operation.
NOTICE
Summary of Contents for ET Series
Page 52: ...052 Linkage Setting ...
Page 130: ...130 ...
