AR Aerocraft Transmitter User Manual
I.
Fly Sky Transmitter&Receiver Board
1. First fix the receiver board on a suitable position of AR aerocraft,connect the plug with the interface
of AR aerocraft main board.(be attention about the direction).Make sure they are connecting steadily,if
not ,the signal can't transmit.
2. Turn on the power of transmitter,notice that left and right joysticks must be in a center position.The
switch of SW.A and SW.B shold shift to the reverse side of transmitter,turn the VR(A) knob by
clockwise to end,and turn the VR(B) knob by anti-clockwise to end.Following is function of rockers of
both sides:
Left Rocker Up/Down : Throttle(Up/Down)
Left Rocker Left/Right:Rudder (Left /Right Flying )
Right Rocker Up/Down:Elevator(Forward/Backward)
Right Rocker Left/Right: Flap(Left /Right
Crabing )
