2 0
●
Settings
In the "Preferences" interface,use Up / Down keys
to select the "throttle curve settings", press OK
key to confirm enter the function interface, as
above.
The steps of settings is as follows:
1. Flight status (normal or stunt). Use the arrow
keys to enter edit state, you use + / - keys to select
one of the curve, then enter the following settings.
2. Set the D / R, Use the arrow keys to select the
"D / R"in the screen, when the screen light off,
then enter the edit state of this function(you can
choose individual settings on one or setting on both
sides ), Press the + / - keys to set the values,long
press the OK key to return to the default value.
3. Use left and right arrow keys to select curve
points, + / - keys to change the value of curve points.
4. Set successful, you can press EXIT key to return.
8.Pitch Curve Settings
Curve picture
Flight Mode
Dual rate
Exponentia
Curve point
●
Function
●
Settings
Pitch curve with the throttle stick position can
adjusted the engine rpm flight in the best state,
This pitch curve can be set normal, stunt and lock
curve and so on. The operation of those curve can
carried out by the switch.Pitch curve of normal
curve is based on hovering, as a certain engine rpm
to adjust the pitch to the best place . Stunt pitch
curve is maintaining a certain engine rpm, make the
pitch with the throttle to complete stunts in flying.
Pitch curve with the throttle stick position can
adjusted the engine rpm flight in the best state,
This pitch curve can be set normal, stunt and lock
curve and so on. The operation of those curve can
carried out by the switch.Pitch curve of normal
curve is based on hovering, as a certain engine rpm
to adjust the pitch to the best place . Stunt pitch
curve is maintaining a certain engine rpm, make the
pitch with the throttle to complete stunts in flying.
9.Throttle Cut Settings
●
Function
Throttle cut settings function is to make the
engine off when the flight finished. Switch K1 is for
opening and closing the throttle. Throttle trim
adjustment will affect the throttle closed position
when implement the action. So when moving the
throttle trim,have to check the throttle closed action
position .
Settings and Notes
:
When the throttle closed
switch move to open, can adjust the value until the
carburetor valve fully closed (engine shutdown).
To prevent the error in the adjustment operation,
the motions available range of the throttle closed
function should be set near the engine speed .
Warning
:
●
Settings
In the "Preferences" interface,use Up / Down keys
to select the "throttle cut settings", press OK key
to confirm enter the function interface, as above.
The steps of settings is as follows:
1, the first to use the arrow keys to select Edit
Item2. Throttle cut settings function on or off with
a + / - key to implement.3.Under the throttle cut
condition, the rate of value and trim amount can
settings with + / - key to the implement (adjustable
range of ± 45%).4. Set successfully, press EXIT key
to return.
Helicopter Functions
INSTRUCTION MANUAL
WFT07 REMOTE CONTROL DEVICE