2 3
13.Gyro Sens Mixing
●
Function
●
Settings
Can adjust the gyro sensitivity directly in the
transmitter, you can choose AVCS gyro (GY) and
ordinary gyro (STD). Gyroscope sensitivity switch
should plugs into the 5 channel of the receiver.
This time the 5channel the auxiliary channel setting
function is temporarily non-functional,sensitivity
switches by flight mode (Normal stunt lock) .
Enter the "Preferences"menu then select the
"Advanced setting"option.,use Up / Down keys to
select the" gyro sens mixing "function , press the
OK key to enter the function interface. As above.
Specific settings steps are as follows:1. First to
use arrow keys to enter the edit mode.
2. In the "mode" option set flight mode, With a + / -
key to implement.
3. In the "mixing" options use+/-key to implement
the function. Long press OK key to restore default.
4. In the "position" option to set the control position
on or off this function, with a + / - key to implement.
5. In the "ratio" option set the mixing value, with + / -
key to implement. Long press OK key to restore the
default value.
4. Set successfully, press EXIT key to return.
14.Advanced Settings
●
Function
●
Settings
In order to make aircraft achieve a desired effect
even more , we added a "advanced settings"
function.
Interface as shown. The purpose of each function
will be introduced in the following
In the "Preferences"interface,use Up / Down
keys to select "Advanced Settings" and press OK
key to enter the function interface, as above.
In this state, press left and right arrow keys can
turn the pages, press the + / - keys to select the
function item. The specific function and setting
method. Please refer below.
Helicopter Functions
INSTRUCTION MANUAL
WFT07 REMOTE CONTROL DEVICE