2 9
8 Flap trim
●
Function
●
Settings
This feature is for 6 channels to do the trim stick
action.
Press the power key to boot into the "parameter
settings" menu, use Up / Down keys to select the
"Flap trim", press OK key to enter the function
interface, as above. The steps of settings is as
follows:
1. Using the up / down keys can choose to the edit
item.
2. Selected the options, press the + / - key to edit the
data. Long press OK key to restore the default
values.
3. Set successfully, press EXIT key to return.
9 Aileron diff control
●
Function
●
Settings
This feature is to use two aileron servo, you can
create the differential aileron movement.
Press the power button to boot into the "parameter
settings" menu,use Up / Down keys to select the
"Aileron diff control", press OK key to enter the
function interface, as above. The step of settings
is as follows:
1. Use the up / down key to select the Edit Item
2. Selected the options, press the + / - key to edit the
data. Long press OK kry to restore the default value.
3. Set successfully, press EXIT key to return.
10 Ele-Flap Mixing
●
Function
●
Settings
This feature is to make the flap, elevator doing the
corresponding action. Flap down, elevator up,
make the stunt movement more fluent . K2 controls
the switch.
Press the power button to boot into the
"Parameter setting" menu, use Up / Down keys to
select the "Ele-flap mixing", press OK key to enter
the function interface. As above.
The step of settings is as follows:
1. Using the up / down keys to choose the edit item.
2. Selected the options, press the + / - key to edit the
data. Long press OK key to restore the default
values.
4. Set successfully, press EXIT key to return.
INSTRUCTION MANUAL
WFT07 REMOTE CONTROL DEVICE
Airplane Function