3 2
4
.
Aileron-2
●
Function
●
Settings
Aileron -2 is aileron another channel 's
distribution.
Press the MENU key to boot into the "System
Settings" menu, use Up / Down keys to select the
"aileron -2", press the OK key to enter this function
interface, as above.
The step of settings is as follows
1. Using the + / - keys to choose different models.
2. Selected the options, press OK key to confirm.
3. Set successfully, press EXIT key to return.
7
Code Match
●
Function
●
Settings
This remote control is the 2.4G spread spectrum,
frequency hopping systems, with a high anti-
interference. Each remote control has unique
identification code information, before you use the
remote control system pls matched with the 2.4G
receiver including in the device.
Enter the "Preference Settings" under "code"
menu . Click OK key to enter the state of the
coding. As above
The step of settings is as follows:
1. First to use the arrow keys to select on the
code, the process of the code operation needed
within a short distance. 2.4G module system can not
use this function in the closed state, please refer to
“
" .Once the code
Coaching / Simulation
successfully systemwill initiative to return the menu.
User also Can press "Exit"key to quit.
Warning :
When using this function, please ensure that no
other operation of remote control!
5
Programmable
Mixing Settings
6 Fail Safe
Selection Refer the instroduction on page
24
Selection Refer the instroduction on page
25
INSTRUCTION MANUAL
WFT07 REMOTE CONTROL DEVICE
Airplane Function
FCC WARNNING
Changes or modifications not expressly approved by the party responsible for compliance could void the
user's authority to operate the equipment..