Wfly WFT06II, Instruction Manual

Basic operation

  A  Factory default 

  B select mode number

●

Menu display: SYS16 (helicopter mode ) - REST

●

Function: SYS  REST 

●

Function description: return to factory default setting. The default setting might be modified during retailer's 

demonstration. Use this function to return to factory default settings.

●

Setting method :

1Press and hold Menu button to enter setup. Press Menu button 15 times, till SYS 16 Being displayed. 
2 When MD H displayed press up button switch to REST to return factory default setting
3 press down button to confirm, when Sure blinking, press and hold + to save. Press other button to cancel 
edit.

●

Menu display: SYS16 Helicopters Mode - MD H / MD A 

●

Function: System parameter helicopter mode / Airplane mode

●

Function description: when you have multiple models need to be used with this transmitter, choose the 

pre-saved data can let you easily choose the data, don't have to set the parameters every time. This 
transmitter can save up to 8 modle data with individual number for option.

●

Setting method :

1 Press and hold Menu to enter system setting mode, press menu button 15 times until it shows SYS16;
2 when MD H or MD A being displayed, press+/- to change to your model number.
3 press down button to confirm, SURE will be shown during saving, press and hold + to save. Press any 
other button to cancel edit.

 Initial setup

Press and hold Menu button 
to enter setup. Press Menu 
button 15 times.

Press +/- to select mode 
number. The transmitter can 
save upto 8 model data

When Sure blinking, press 
and hold + to save.

After SYS being displayed 
for one second, it will shows 
the model number

Press +/- to select mode 
number. The transmitter can 
save upto 8 model data

Data save will complete after 
WAIT being displayed for 
one second

Press up button switch to 
REST to reset, press down 
button to confirm

Press down button to confirm 
change, press and hold + 
button to save

1 0