4
Assembly Instructions
NOTE
: Please do not fully tighten all bolts until you finish assembling all parts. Once assembled,
go back and fully tighten all bolts. This will make the assembly easier.
1. Unpack the unit and confirm that you have all the hardware and required parts.
2. Hold the Spine and Legs Assembly (A) upright and simply swing the legs outward.
3. Attach the Top and Bottom Shelf Frame Front Assembles (D and F) to the side and back rails of
the Spine and Legs Assembly (A) respectively. Make sure that the drilled hole on the center
support faces downward.
4. Fit the Middle Shelf Frame Front Stretcher (E) to the middle shelf side rails.
F
E
D
A
A
D/F
D/E/F
A
A
