Model # AVCEC54-AT
Please call for replacement parts or assistance: 1-866-942-5362
Whalen Furniture Mfg., Inc.
Page 18
Factory No. 15548
Assembly Instructions
26.
Position the 3 Door Panels (N, O and P) on a level and protective surface with the cut out facing up, as
shown above.
27.
Extend the Hinges Arms (18) and rest the Hinge Cups onto the cutouts of the Door Panels (N, O and P).
Secure the Hinge Arms in place by using two 1/2”
Zinc
Screw
s (5) in each.
28.
Using the pilot hole as a guide, fasten one Strike Plate (14) to the upper corner of each Door Panel (N,
O and P) with the 1/2”
Black Screw
(6). Make sure that the Strike Plates (14) will properly match the
Magnetic Catches (13) installed on the Fixed Shelf (B).
Strike Plate
(3 used in this step)
⑭
1/2”
Black Screw
(3 used in this step)
⑥
1/2”
Zinc Screw
(12 used in this step)
⑤
Hinge Arm
(6 used in this step)
⑱
N
O
P
14
6
N/O/P
N/O/P
