Model # BBAT27TC
Please call for replacement parts or assistance:
1-866-942-5362
Whalen Furniture Mfg. Inc.
Factory No. 72-14494
Page 6
Assembly Instructions
6. Stand the unit upright. Go back and tighten all the bolts with Allen Wrench provided.
7. Put Suction Cups (1) firmly into top holes of the Lower Shelf Frame (B, C & D) as shown in
detail #3. Make sure that the Suction Cups go all the way into the pre-drilled holes to
prevent the glass shelf from falling and getting damage.
8. Screw the Glass Raisers (6) all the way into the top holes of Top Shelf Frame (A) and Left &
Right Leg (F & G). See detail #3A.
9. Place the Glass Shelves & Top Glass (H) in place begin with Bottom Glass Shelf (K) as
shown in detail #3. Make sure the glass is properly centered and the black side of glass is
down. Also, be sure to press down evenly and firmly each shelf onto the Suction Cups to
make sure they securely rest onto the Suction Cups.
Note: Make sure that the glass sits correctly. If glass is scratched you can minimize the
damage by using a BLACK marker and filling in scratched area from underneath.
10. In case of uneven floor, Floor Levelers are provided at the bottom of both Legs (F & G).
Simply tilt the unit back and raise or lower floor leveler by hand to correct tilting, until the unit
is level. See detail #3A.
Note: When adjusting the height and tilting the unit make sure that
you ask for assistance to prevent the glass from falling.
Required hardware in this step
Description:
(1)- Suction Cup
(6)- Glass Raiser
Sketch
Qty.
(12 pcs)
(5 pcs)
