10
Assembly Instructions
16.
Now, go back and securely tighten all the cam locks and screws. Make sure that all the parts are tight
and there are no gaps between the parts. This will help keep the unit square.
17.
Place the drawer back by pushing the ball bearing cart all the way to the end of the slides (in both sides)
and align the slide runners on the drawer with the slide tracks on the unit and push it carefully inside
until it stops.If the drawer does not go in smoothly, please take it out and repeat the step.
CAUTION
:
Lock the casters at all times when not rolling the unit and particularly when opening the drawers
.
FRONT
FRONT
Ball bearing cart
Ball bearing cart
Left drawer
Right drawer
Take Safety Precautions When Using Your Storage!