2
MANUFACTURER: Whalen Furniture Manufacturing
CATALOG: Fallbrook File
MODEL # SPUS-FBSF-GM
CAM LOCK SYSTEM OPERATION
HOW THE KNOCK DOWN (KD) ASSEMBLY SYSTEM WORKS
1.
Screw the Cam Bolt into the threaded inserts on the panel. Connect both panels together; making sure Cam
Bolt goes into the pre-drilled hole on the end of panel for Cam Lock.
2.
Insert the Cam Lock into the pre-drilled large hole on the panel. Make sure the arrow on the face of Cam
Lock faces out and points towards Cam Bolt.
3.
Take a Phillips screwdriver and rotate the Cam Lock clockwise to lock the Cam Bolt in place.
You are now ready to assemble the KD unit
M A X I MU M R EC O M MEN D ED W EI G HT LO A D S
MAXIMUM LOAD 13.6 kg / 30 lb
MAXIMUM LOAD 22.7 kg / 50 lb
MAXIMUM LOAD 4.5 kg / 10 lb
THIS UNIT IS INTENDED ONLY FOR USE WITHIN THE MAXIMUM
WEIGHTS INDICATED. USE WITH LOAD HEAVIER THAN THE MAXIMUM WEIGHTS
INDICATED MAY RESULT IN INSTABILITY, CAUSING POSSIBLE INJURY.
1
2
3
