Model # ODUS-CGTP
Please call for replacement parts or assistance:
1-866-942-5362
Whalen Furniture Mfg., Inc.
Page 5 Factory No. 16015
File Drawer Assembling
1.
Unpack the unit and confirm that you have all the hardware and required parts. Assembly the unit on a
carpeted floor or the empty carton to avoid any scratch.
2.
Pick up the Ball Bearing Slides (Y) and separate the Slide Runners for the following steps. Extend the
Slide Runner all the way forward. Press the plastic release lever of the ball bearing slides up and pull
the Slide Runner complete out.
3.
Attach the separated Slide Runners (Y) to the Drawer Side Panels (R and S) respectively with three 1/2”
Screws (9) per slide runner. Ensure the closed end of Slide Runner against the front edge of drawer side
panel with cam bolt holes.
4.
Securely screw four Cam Bolts (2) into the designated small holes on the Drawer Front (P) with a
Phillips screwdriver, as shown.
9
9
Y
Y
R
S
Y
2
2
2
P
