7
Upper Drawer Assembling
NOTE:
DO NOT fully tighten all cam locks and bolts until you finish assembling all parts. Once
assembled, go back and fully tighten all cam locks and bolts.
1.
Unpack the unit and confirm that you have all the hardware and required parts. Assemble the unit on a
carpeted floor or the empty carton to avoid any scratch.
2.
Securely screw the Cam Bolts (9) into the designated small holes on the Upper Drawer Front (G) using a
Phillips screwdriver.
3.
Glue one Small Wood Dowel (10) into the drilled holes on the end of one Drawer Support (L).
NOTE
: It is very important to use a small amount of glue on both ends of dowels.
G
9
10
L
10
10
