21
Assembly Instructions
Tools required: Phillips screwdriver, stud finder, power drill and 1/8” drill bit.
46.
Ask for assistance to position the assembled fireplace at the desired location against a wall. If necessary,
adjust the installed Floor Levelers at the bottom of the Base to level the unit. Now, follow the instructions
printed on the plastic bag containing the Tipping Restraint Hardware to attach the tip-over restraints to the
unit and the wall.
NOTE
: The tipping restraint hardware included is for wooden stud wall construction. It must be attached to
a wall stud. Depending upon your wall construction, different anchor hardware maybe required. Please
contact your local hardware store for assistance. Young children can be seriously injured by tipping
furniture. You must install the Tipping Restraint Hardware with the unit to prevent the unit from tipping,
causing any accidents or damage. The tipping restraints are intended only as a deterrent, they are not a
substitute for proper adult supervision. The tipping restraints are not earthquake restraints. If you wish to
add the extra security of earthquake restraints, they must be purchased and installed separately.
47.
Connect the fireplace to the power transformer. Follow the operating manual for the electric fireplace insert
to control your fireplace.
