background image

Parts and Hardware List 

 

Please read completely through the instructions and verify that all listed parts and hardware are present 
before beginning assembly. 
 
 
 
 
 
 

A- Top Panel (Qty. 1)                                  B- Center Shelf (Qty. 1)                    C- Bottom Panel (Qty. 1) 

                                     

 
 
 
 
 
D- Lower Side Panel                              E- Left Lower Partition Panel              F- Right Lower Partition Panel  

(Qty. 2)                                                          (Qty. 1)                                               (Qty. 1) 

 
 
 
G- Upper Side Panel (Qty. 2)         H- Upper Side Panel Molding (Qty. 2)        I- Upper Partition Panel (Qty. 1) 
 
 
 
 
J- Upper Partition Panel Molding (Qty. 1)     K- Top Reinforcement (Qty. 1)          L- Middle Crossbar (Qty. 1) 
 
 
 
 
M- Left Middle Stile (Qty. 1)                N- Right Middle Stile (Qty. 1)            O- Bottom Front Stretcher (Qty. 1) 
 
 
 
 
P- Bottom Left Side Stretcher                  Q- Bottom Right Side Stretcher            R- Bottom Middle Stretcher                   

(Qty. 1)                                                         (Qty. 1)                                             (Qty. 1) 

 
 
 
 
S- Bottom Back Stretcher                   T- Door                  U- Adjustable Shelf         V- Upper Back Panel               

(Qty. 1)                                (Qty. 2)                             (Qty. 2)                             (Qty. 1) 

 

 

 
 
 
 
 
W- Lower Back Panel (Qty. 2)          Fireplace Insert (Qty. 1)                     Remote Control with Battery (Qty. 1)   

Summary of Contents for Sedona MNFP54BF23-5

























Reviews: