5
Assembly Instructions
1.
Unpack the unit and confirm that you have all the hardware and required parts. Assemble the unit on a
carpeted floor or the empty carton to avoid any scratch.
2.
Locate the Desk Top (A), Desk Left and Right Side Panels (B and C) with the holes facing up. Securely
screw the Cam Bolts (2) into the designated small holes by a Phillips screwdriver, as shown.
3.
Glue four M8 x 30 mm Wood Dowels (3) into the inner holes of Modesty Panel (D) at both ends. Attach
the Modesty Panel (D) between the Desk Left and Right Side Panels (B and C) with four Cam Locks (1)
(Refer to page 3 on Cam Lock system operation supplement).
B
C
D
1
3
B/C
D
A
B
C
A/B/C
2
