7
Assembly Instructions
NOTE
: Please do not fully tighten all bolts until you finish assembling all parts. Once assembled, go
back and fully tighten all bolts. This will make the assembly easier.
1.
Unpack the unit and confirm that you have all the hardware and required parts. Assemble the unit on
a carpeted floor or the empty carton to avoid any scratch.
2.
Place the Desk Top (A) upside down on a level and protected surface.
3.
Securely screw the Cam Bolts (2) into the designated small holes on the Desk Top (A) with a Phillips
screwdriver.
DO NOT
overtighten the Cam Bolts.
NOTE:
Screw-in cam bolts must be screwed down flush.
4.
Securely screw the Cam Bolts (3) into the threaded holes on the Side Frames (C and D) with a Phillips
screwdriver.
2
A
C
D
3
