v
v
3
ASSEMBLY INSTRUCTIONS
v
1
Step 2:
Mark wall for vanity placement and note the location of the
water supply lines and drain on the back panel of vanity.
Step 1:
Insert wood dowels (FF) into vanity feet (D). Attach vanity
feet (D) to the vanity base (B) by inserting the bolts (CC)
through lock washers (DD) and flat washers (EE). Tighten
with hex wrench (GG).
2
Step 3:
Move vanity (B) into proper place against the wall.
3
B
4
ASSEMBLY INSTRUCTIONS
v
4
v
6
v
5
Step 4:
Install faucet, drain and supply lines (none included) to
vanity top (A) according to the instructions supplied with
those items.
A
Step 6:
In case of uneven floors, floor levelers are provided at the
bottom of the vanity. If necessary, adjust floor levelers by
hand to correct tilting and/or level doors.
Hardware Used
Hardware Used
Bolt
Door Handle
x 8
x 2
CC
BB
BB
Lock Washer
x 8
Flat Washer
x 8
Hex Wrench
Wood Dowel
x 1
x 4
DD
EE
GG
FF
CC
DD
DD
EE
FF
EE
B
Step 5:
Remove preassembled bolts from door handles (BB).
Insert door handles (BB) into doors, securing with
previously removed bolts.
D
