background image

Model # WMCPRO-6 

Please call for replacement parts or assistance: 

1-866-942-5362

 

Whalen Furniture Mfg., Inc. 

 

         Page 2     

 

 

  Factory No. 105-15491

 

QUALITY GUARANTEE 

 

We are confident that you will be delighted with your Whalen Furniture purchase. 

 

Should this product be defective in workmanship or materials or fail under normal use, 
we will repair or replace it for up to one (1) year from date of purchase. Every Whalen 
Furniture product is designed to meet your highest expectations. We guarantee that 
you will immediately see the value of our fine furniture. 

 

This warranty gives you specific legal rights and you may also have other rights which 
vary from State to State. 

 

Customer Service: 1-866-942-5362 

 

8:30 a.m. - 4:30 p.m. PST, Monday to Friday 

 

www.whalenstyle.com 

 

 
 

MANUFACTURER: Whalen Furniture Mfg., Inc. 
CATALOG:

 

Flat Panel Console with Swinging Floater (WMCPRO-6) 

DATE OF MANUFACTURE: October 2012 
MADE IN CHINA

  

 

 

FITS UP TO MOST 60” FLAT PANEL TVs 
MAXIMUM LOAD 165 lb. (74.8 kg) 

 

 
 

FITS UP TO MOST 56” FLAT PANEL TVs 
WITHOUT DELUXE BRACKET 
MAXIMUM LOAD 135 lb. (61.2 kg) 

 

MAXIMUM SHELF LOAD 50 lb. (22.7 kg) 
 

 

MAXIMUM LOAD 30 lb. (13.61 kg) 

 

 

 
 

 
 

 
 

  

 

THIS UNIT IS NOT INTENDED FOR USE WITH CRT TVS. USE ONLY 

WITH FLAT PANEL TVS AND AUDIO/VIDEO EQUIPMENT MEETING RECOMMENDED SIZE 
AND WEIGHT LIMITS. NEVER USE WITH LARGER/HEAVIER THAN RECOMMENDED FLAT 
PANEL TVS OR EQUIPMENT. TO AVOID INSTABILITY, PLACE FLAT PANEL TV IN CENTER 
OF UNIT; CRT TVS, IMPROPERLY POSITIONED FLAT PANEL TVS, OR FLAT PANEL TVS 
OR OTHER EQUIPMENT THAT EXCEED RECOMMENDED SIZE AND WEIGHT LIMITS 
COULD FALL OFF OR BREAK THE UNIT, CAUSING POSSIBLE SERIOUS INJURY. 

Summary of Contents for WMCPRO-6






















Reviews: