Model # WMCPRO-6
Please call for replacement parts or assistance:
1-866-942-5362
Whalen Furniture Mfg., Inc.
Page 3
Factory No. 105-15491
Important
Before you begin:
Open, identify and count all parts prior to assembly. Lay out on a
smooth and non-abrasive surface. You will need the parts identified on page 4, 5 & 6 of
this instruction manual.
NOTE
: IT IS VERY IMPORTANT TO USE GLUE WITH DOWELS. EXCESS GLUE CAN
BE WIPED OFF WITH DAMP CLOTH.
Insert Dowels AT LEAST half of the way tapping lightly with a rubber mallet IF NECESSARY.
CAM LOCK SYSTEM OPERATION
HOW THE KD ASSEMBLY SYSTEM WORKS
1. Screw Cam Bolt into the threaded insert on panel.
2. Insert Cam Lock into pre-drilled hole on panel.
3. Make sure Cam Lock pointed arrow is pointed towards the entry of Cam Bolt.
4. Connect both panels together; making sure Cam Bolt goes into pre-drilled hole on the
end of panel with Cam Lock.
5. Once Cam Bolt is connected inside Cam Lock, take Phillips Screwdriver and tighten
Cam Lock clockwise.
You are now ready to assemble our KD unit.
