Assembly Instructions
1.
Connect Lower Front Molding (9) to Bottom Panel (7) by attaching 2 Plastic Connectors (D) at the joint with
#8 x 13 mm Screws (E), using the pilot holes as a reference. Tighten the Screws with the Phillips Screwdriver.
2.
Screw 3 Cam Bolts all the way into the small holes located on Side Panel Left (4) as shown below. Insert the
M8 x 30 mm Dowel (C) into the end holes as a guide, attach both Bottom Panel (7) and Stretcher (3) to the
Side Panel Left (4) by engaging Cam Locks (A).
3.
Repeat last step with Side Panel Right (5).
Please call for replacement parts or assistance:
1-866-942-5362
Whalen Storage
Factory No.: 15294
Page #6 of 11