24
2.50" (63 mm)
0
.4
3
7
5
"
(1
1
m
m
)
Assembly Instruction for installing Mounting Frame onto a BRICK,
SOLID CONCRETE OR CONCRETE BLOCK WALL
NOTE: If you are mounting your TV to a wall with wooden studs, skip this section.
This assembly
requires an
electric drill and level (not included).
41. Begin by placing the MOUNTING FRAME (N) level against the wall where you intend to mount
the TV. Using the MOUNTING FRAME (N) as a template, mark 4 drill points with a pencil.
42. With an electric drill (not included) on its low setting, drill 7/16 inch diameter holes to at least 2½
inch deep. Insert CONCRETE ANCHORS (12) into the pre-drilled holes so that they are flush with
the wall.
43. Place the MOUNTING FRAME (N) level in the desired position against the wall. Secure the
MOUNTING FRAME (N) to wall with LAG BOLTS (13) and WASHERS (14) at the drill points.
Tighten bolts firmly, but be careful not to over-tighten.
Concrete Anchors should only be used for masonry mounting.
NEVER use the wall anchors to mount the unit to drywall.
Maximum weight 135 lb. (61.2 kg)
