EVP-X FULL RANGE
EVP-X12 • EVP-X12M • EVP-X15 • EVP-X15M • EVP-X215
EVP-X FULL RANGE AND SUB BASS
EVP-X15B • EVP-X18B
SUB WOOFER OPERATION:
PASSIVE MODE
W H A R F E D A L E P R O E V P - X S E R I E S
EVP-X Series full range system
AMP
Full range output from amp
to EVP-X full range input
Full range
signal from
audio mixer
HF
AMP
LF
AMP
LF
HF
Speakon™ Plug
Connection
Pin 1+ = + on
amp terminal
Pin 1- = - on
amp terminal
or standard
1
⁄
4
” jack
AMP
Full range output from amp to
EVP-SB SUB input
Full range
signal from
audio mixer
Speakon™ Plug
Connection
Pin 1+ = + on
amp terminal
Pin 1- = - on
amp terminal
or standard
1
⁄
4
” jack
Full range
signal from
audio mixer
Linked from EVP-SUB
mid/high output to
EVP-X full range input.
EVP-X full range & EVP-SUB extended full range system
EVP-X full range & EVP-SUB Series extended full range
system with external active crossover
pre-filtered output from active
crossover to
(high)EVP-X full range input
pre-filtered output from
active crossover to
(low) EVP-SUB input
Model Name
EVP-X12
EVP-X12M
EVP-X15
EVP-X15M
EVP-X215
EVP-X15B
EVP-X18B
SYSTEM TYPE
12” 2-way
12” 2way monitor
15” 2-way
15” 2way monitor
Quasi 3 way
15” compact sub 18” compact sub
FREQ RESP +/- 3 DB
55 - 20kHz
60 - 20kHz
45 - 20kHz
50 - 20kHz
40 - 20kHz
45 - 250Hz
38 - 250Hz
SENSITIVITY 1W@1M
98dB
98dB
98dB
98dB
100dB
99dB
100dB
NOMINAL DISPERSION HxV
90º x 60º
90º x 60º
90º x 60º
90º x 60º
90º x 60º
--
--
PEAK SPL
128dB
128dB
129dB
129dB
133dB
131dB
134dB
SYSTEM IMPEDANCE
8
Ω
8
Ω
8
Ω
8
Ω
4
Ω
4
Ω
4
Ω
POWER HANDLING
(Watts)
Continuous
250
250
300
300
500
400
600
Music
500
500
600
600
1000
800
1200
peak
1000
1000
1200
1200
2000
1600
2400
LF DRIVER
LF DRIVER SIZE (mm/ins)
305/12
305/12
380/15
380/15
380/15
380/15
470/18
COIL SIZE (mm/ins)
_51.6 / 2”
_51.6 / 2”
_64.26 / 2.5”
_64.26 / 2.5”
_64.26 / 2.5”
_77.06 / 3.0”
_102.62 / 4.0”
IMPEDANCE (ohms)
8
Ω
8
Ω
8
Ω
8
Ω
8
Ω
4
Ω
4
Ω
HF SECTION
COIL SIZE (mm/ins)
44/1.75
44/1.75
44/1.75
44/1.75
44/1.75
--
--
EXIT SIZE
(mm/ins)
25/1
25/1
25/1
25/1
25/1
--
--
DIAPHRAGM MATERIAL
titanium
titanium
titanium
titanium
titanium
--
--
IMPEDANCE (ohms)
8
Ω
8
Ω
8
Ω
8
Ω
8
Ω
--
--
HF HORN
SHAPE
Elliptical Elliptical
Elliptical
Elliptical
Elliptical
--
--
THROAT SIZE (ins)
1
1
1
1
1
--
--
CROSSOVER SECTION
TYPE
2-way full range 2 way full range
2 way full range
2 way monitor
2 way full range
subwoofer
subwoofer
LOW PASS (Hz)
2.2kHz
2.4kHz
2.2kHz
2.4kHz
2.2kHz
150Hz
150Hz
HIGH PASS FILTER (Hz)
--
--
--
--
--
100Hz
100Hz
HF DRIVER PROTECT TYPE
Bulb
Bulb
Bulb
Bulb
Bulb
--
HF EQ (BOOST/FLAT)
3dB
3dB
3dB
3dB
3dB
--
--
ENCLOSURE
ENCLOSURE TYPE
Vented
Vented
Vented
Vented
Vented
Vented
Vented
ENCLOSURE SHAPE
Trap.
Monitor
Trap.
Monitor
Trap.
Rect.
Rect.
FINISH MATERIAL
Black carpet
Black carpet
Black carpet
Black carpet
Black carpet
Black carpet
Black carpet
TRIPOLE STAND
STAND BOTTOM
Yes
No
Yes
No
--
--
--
STAND TOP
--
--
--
--
--
Yes
Yes
IN / OUT PANEL
CONNECTORS INPUT
2 x
1
⁄
4
” jacks and 2 x
1
⁄
4
” jacks and 2 x
1
⁄
4
” jacks and 2 x
1
⁄
4
” jacks and
2 x
1
⁄
4
” jacks and 2 x
1
⁄
4
” jacks and 2 x
1
⁄
4
” jacks and
2 x Speakon™
2 x Speakon™
2 x Speakon™
2 x Speakon™
2 x Speakon™
2 x Speakon™
2 x Speakon™
type connector
type connector
type connector
type connector
type connector
type connector
type connector
1 x
1
⁄
4
” jacks and 1 x
1
⁄
4
” jacks and
HIGH PASS FILTER
No
No
No
No
No
1 x Speakon™
1 x Speakon™
CONNECTOR OUT
type connector
type connector
WEIGHT NET (kg)
19.3kg
18.5kg
25.95kg
23.4kg
43.2kg
33.5kg
47.4kg
WEIGHT GROSS (kg)
22kg
21.1kg
28kg
29.5kg
48kg
36.5kg
50.7kg
DIMENSIONS (mm)
HEIGHT
590
560
675
645
1058
591
610
FRONT WIDTH
430
424
460
445
502
460
522
BACK WIDTH
297.5
--
294.5
--
330
--
--
DEPTH
370
441
450
473.5
467
510
610
Wharfedale International Limited, IAG House,
Sovereign Court, Ermine Business Park, Huntingdon,
Cambs, PE29 6XU, England
WHARFEDALE
website
: www.wharfedalepro.com
IAG reserves the right to alter or improve
specifications without notice.
All rights reserved © 2005 Wharfedale Pro
IAG is a member of the International Audio Group
SUB WOOFER OPERATION:
ACTIVE MODE
CONNECTION
1.
Connect the speaker cable securely to your EVP-X cabinet and
power amplifier (the amplifier should be
off, power down mode
).
Where possible use Speakon™ connectors as they are
professional high current connections specifically designed for this
application. Try to use the correct type of speaker cable according
to the handling ability of your EVP-X Series Cabinet. Use 2
conductor equal stranded insulated cable for speaker runs. It is
always advisable to use heavier conductor cables on longer runs.
2.
If using Speakon™, insert the speakon and rotate 1/8 of a turn
until locked in. If using a jack plug insert until secure.
3.
Power up amplifier with levels on zero. Confirm units are
operating.
Active
Crossover
EVP X Series Manual 6/1/04 3:12 pm Page 2
