8
5.
GAIN selection switch A:
This switch selects the proper gain structure for INPUT
A. If a microphone is connected to INPUT A, use mic mode (up). If the signal
source is anything other than a microphone (eg an analogue playback device,
keyboard or mixer output) use the line selection (down).
6.
GAIN selection switch B:
This switch selects the proper gain structure for INPUT
B. If a Bluetooth device is connected to INPUT B, use BT mode (up). If the signal
source is anything other than a Bluetooth device (eg analogue playback device,
keyboard or mixer output) use the line selection (down).
7.
90Hz Hi Pass Filter switch:
Used to reduce bass buildup due to half space loading. This is especially useful
when using the Typhon on the floor as a floor monitor.
8.
Power “ON” indicator LED and LIMIT indicator LED:
The bracketed LED to the
left of the POWER switch illuminates when the power switch is in the ‘ON’ posi
tion. The LIMIT LED illuminates when the signal limiter is limiting the level of the
signal. This process prevents distortion and overload.
9.
Horn LED defeat switch:
Switches off the front horn power LED for discrete
applications.
10.
POWER ON / OFF switch:
This switch turns the power on and off.
11.
Output source “LOOP / MIX” switch:
In the “LOOP” mode, this switch routes the
signal of INPUT B to the line level XLR OUTPUT jack, bypassing the EQ section
and volume control. When in the MIX mode, this switch routes the combined (or
“mixed”) signals of both INPUT A and INPUT B to the line level XLR OUTPUT jack.
12.
XLR and ¼” input jacks for INPUT A and INPUT B.:
These connectors allow XLR
or ¼” balanced input connections to INPUT A and INPUT B
13.
XLR line level OUTPUT:
This connector provides a balanced line level output for
connection to additional active loudspeakers (such as another Typhon-AX12),
powered subwoofers or external amplifiers.
14.
POWER cord input:
Typhon uses a standard IEC, three prong, grounded AC elec
trical connection. Be sure that you are plugging into the correct source voltage
that matches what is indicated just below the power cord jack.
15.
RCA Inputs:
Typhon-AX8 and Typhon-AX8-BT only. For connection to stereo
line level audio sources.
