4000x Series Digital Clock
Operating and Installation Instructions
4 - Time and Date Setting
The 4000x series digital clocks can be configured to automa cally adjust for daylight savings changes,
however if the unit is run in Standalone mode of opera on (i.e. unsynchronised), you may occasionally
need to manually adjust the me.Please refer to the diagram below for further informa on.
Func on ‘Time Se ng Mode’. Press ‘Up‘ to enter ‘Time Se ng Mode’ and set the seconds count.
Seconds Se ng Mode. Press ‘+’ to increment seconds, ‘-’ to set to zero. Press ‘Up’ to set minutes count.
Minutes Se ng Mode. Press ‘+’ or ‘-’ to increment or decrement minutes. Press ‘Up’ to set the hours
count. Complete me se ng process detailed in table below.
Fu Ti
Time and Date settings
Function
Display Type
Description
'Up' button function
hh:mm (4200)
hh:mm:ss
(4010)
Second
36
12 47 36
Set second (minus bu on zeros seconds).
Select minutes
Minute
12 47
12 47 36
Set minute.
Select hours
Hour
12 47
12 47 36
Set hour.
Select year
Year
20 14
20 14
Set year.
Select month
Month
26 06
26 06 14
Set month.
Select day of month
Day of Month 26 06
26 06 15
Set day of month.
Select Leap Second
Leap Second
LS No
LS No
Enable leap second - 59, No or 61. (Please leave at
0 unless a leap second is scheduled)
Exit to Time Display
6
Issue 2.2
