A P P E N D I C E S
page A – 31
WheatNet-IP
/ Apr 2009
Similarly you need to define a new logic destination signal in BLADE #19. Click on
the BLADE #19 icon in the System Pane and select the Destinations tab. As before, click
on ADD, then select LIO only, to make the new signal, and name it something like
“Dump Dev.” On the LIO Info tab of the Signal Definition Wizard, click Add, select
“LIO 1 Pin 2” to map the logic pin. In the Direction: box select Output for the direction,
and finally select “User 1” as the logic function (this is where the logic function must
match what you’ve previously defined for the DUMP switch; if these functions do not
match, then the logic connection will not work).
Click Apply, then Close, then Finish on the Wizard, and your new logic destination
signal will appear in the crosspoint grid.
