G E N E R A L I N F O R M A T I O N
page 1 – 30
WheatNet-IP
/ Aug 2011
page 1 – 29
Model Aura8ip
I
nputs
The WheatNet-IP
Aura8ip is fed from a combination of analog and digital inputs
via two DB-25 or eight RJ-45 connectors.
The WheatNet-IP
Aura8ip will accommodate digital inputs having a wide range
of sample rates. These inputs will be sample rate converted to the system’s chosen
sample rate of 44.1kHz or 48kHz, which is set via the WheatNet-IP
Navigator GUI.
The GUI also allows you to select input 8 of the digital BLADE, or of any BLADE
that has a digital input as input 8, to be a primary external reference, and a digital
input 8 from a different BLADE to be a secondary external reference. Please note
that the sample rate of a digital input 8 should be the same, either 44.1kHz or 48kHz,
as the system’s chosen sample rate. If you are using the Aura8ip in a stand-alone
application, one involving no other BLADEs, and if the outputs from Aura8ip must
be synchronized to downstream digital equipment, you must use input 8 for your
external reference, even if you are not using all 8 inputs.
AES sources are by design stereo; if the BLADE is not set to be stereo the appro-
priate Left or Right signal within the AES stream will be applied to the signal path.
Analog 1-4 DB-25
Pin 24 – HI
Pin 12 – LO
Line 1 Lt In
Pin 25 – SH
Pin 10 – HI
Pin 23 – LO
Line 1 Rt In
Pin 11 – SH
Pin 21 – HI
Pin 9 – LO
Line 2 Lt In
Pin 22 - SH
Pin 7 – HI
Pin 20 – LO
Line 2 Rt In
Pin 8 – SH
Pin 18 – HI
Pin 6 – LO
Line 3 Lt In
Pin 19 – SH
Pin 4 – HI
Pin 17 – LO
Line 3 Rt In
Pin 5 – SH
Pin 15 – HI
Pin 3 – LO
Line 4 Lt In
Pin 16 – SH
Pin 1 – HI
Pin 14 – LO
Line 4 Rt In
Pin 2 – SH
WheatNet-IP
/ Oct 2012