G E N E R A L I N F O R M A T I O N
page 1 – 34
WheatNet-IP
/ Aug 2011
page 1 – 32
Digital 5-8 RJ-45
RJ-45#5 Pin 1 – HI
RJ-45#5 Pin 2 – LO
RJ-45#6 Pin 1 – HI
RJ-45#6 Pin 2 – LO
RJ-45#7 Pin 1 – HI
RJ-45#7 Pin 2 – LO
RJ-45#8 Pin 1 – HI
RJ-45#8 Pin 2 – LO
Model MADI
Digital Audio Connections
A pair of 75 ohm BNC connectors are provided on the rear panel for input and output
connections. All connections should be made with a high quality 75 ohm coaxial cable
terminated to male BNC connectors. By installing digital video grade coax, cable runs
of 200M or more can be realized.
BNC IN Pin 1 – HI
BNC IN Pin 2 – SH
BNC OUT Pin 1 – HI
BNC OUT Pin 2 – SH
Optical Fiber Interface
The MADI BLADE supports an optional fiber connection to the
Bridge Router. The MADI BLADE uses an SFP module interface with
integral LC connectors.
Note that the QOT-2001 rear panel on the Bridge router uses SC
connectors, so to connect to a Bridge MADI card a patch cable fitted
with LC connectors on one end and SC connectors on the other
end is required.
Optical Transceiver
Optical Transceivers convert physical signals from elec-
trical to optical (and vice-versa) in a network and couple the
optical signals into (and out of) optical fiber. Small form factor
pluggable (SFP) transceivers, used in the MADI BLADE, are
designed to be hot-swappable in industry standard cages and
connectors (for easy field repair), and offer high speed and
physical compactness.
AES 5 Out
AES 6 Out
AES 7 Out
AES 8 Out
AES In
AES Out
Optical Transceiver
WheatNet-IP
/ Mar 2014