page 3 – 44
FM-531HD / May 2013
F M - 5 3 1 H D P R O G U I
been set. The current password will need to be known beforehand, and it will need to
be entered twice for verification. The password can be any combination of characters,
numbers, or symbols. If the
Remember This Password
check box is checked, the GUI
stores the password on the local PC. If you do not check the check box you will be asked
for the password each time you connect (since the first round of verification will fail).
When asked for a password while logging in you can also check the “remember”
box to save what you enter. That way you don’t need to enter the password every time
you login.
Occasionally you may see the word “pending” temporarily appear in the connec
-
tion status box of the remote GUI. That means the FM‑531HD and Remote GUI are
handshaking on the password string that is being sent.
Pro GUI Access
The system allows you to grant access at certain levels of permission in
order to control the privileges of those accessing the various features of the
FM‑531HD. Privileges are granted by
Access Code
, not by user type. In fact,
user types are created
through the generation
of access codes for those
user types.
Examples:
• Suppose
Access Code 0000 is created
with Preset Takes
being the only box
checked. This means that a user which
has been assigned access code 0000
can only take presets.
• Suppose
Access Code
5678 is cre
-
ated with Preset Takes and Setting
Changes
both checked. This means
that a user with access code 5678 cannot only
take presets, but can also make
changes to the settings within those presets. Note that because Preset Saves was
not
checked when this access code was created, that user may
make changes to a
preset but may not
save
them!
Pro GUI Lock
In the event that security has been enabled by configuring the
GUI Access Code &
Permissions
Dialog (above), then selecting
GUI Lock
will immediately lock the GUI on
the host PC, prohibiting access until it has been unlocked with the proper access code.
Unlocking the FM‑531HD Pro GUI When the Passcode Has Been Lost
There are two ways of gaining access to the device which has been locked by the GUI:
1. Re‑install the GUI
• Re‑install the PC Remote GUI but this time into a NEW folder on your computer.
• Start the GUI from the new location, recreate the previous FM531HD device in
the GUI and assign it the same name and IP address.
• Select the new device and click the GUI’s online button.
Summary of Contents for FM-531 HD
Page 2: ...Technical Manual Wheatstone Corporation May 2013 FM HD Digital Audio Processor FM 531hd...
Page 122: ...page A 2 FM 531HD May 2013 A P P E N D I C E S Appendix A General Specifications A 3 Contents...
Page 128: ...page A 8 FM 531HD May 2013 A P P E N D I C E S Appendix B FM 531HD GPI Interface A 9 Contents...