page 2 – 20
FM-531HD / May 2013
F M - 5 3 1 H D G U R U G U I
The Weekly Rotation window will open as shown
on the right.
2. On the left column, select the days that the preset
should be selected. Any combination of check
boxes may be chosen.
3. Next select the time that the preset should change.
4. Next choose the preset that should be selected
at the time programmed in the previous step.
When finished editing, click
OK.
As many preset change events as desired may be
programmed in the Event Scheduler.
If a one‑time preset change is required, such as might be necessary for a special holiday
or other event, the Long Term Rotation routine should be used.
Creating a Long Term Rotation Schedule
Adding a new event in the Long Term Rotation scheduler works in a similar manner.
The Long Term Rotation entry window appears as follows:
Deleting a Scheduled Event
Deleting a scheduled preset change is as
simple as adding one. Open the Event Scheduler
window by navigating to the System menu and
clicking Events. The Event Scheduler window
will open.
To delete an item in either the Weekly Rota-
tion or Long Term Rotation schedules simply
highlight it in the list and then click the ap‑
propriate Delete button on the right side of
the Event Scheduler window. The highlighted
scheduled event will be removed from the list.
Note that there is no confirmation prior
to the actual deletion of the event!
Summary of Contents for FM-531 HD
Page 2: ...Technical Manual Wheatstone Corporation May 2013 FM HD Digital Audio Processor FM 531hd...
Page 122: ...page A 2 FM 531HD May 2013 A P P E N D I C E S Appendix A General Specifications A 3 Contents...
Page 128: ...page A 8 FM 531HD May 2013 A P P E N D I C E S Appendix B FM 531HD GPI Interface A 9 Contents...
