P82580 B
Sheet 3 of 8
Figure 7 shows a horn speaker w/amplifier connected to a PABX or EKSU which provides one or more audio page ports.
Figure 7.
(A) 8 Ohm, Amplified (1-3 Watts) page port: Maximum capacity is 125 horn speakers w/amplifiers.
(B) 600 Ohm, low power page port: Maximum capacity is 10 horn speakers w/amplifiers (See System Capacity below). If a PRM-
150 preamplifier is used, then maximum capacity is 150 horn speakers w/amplifiers.
SYSTEM CAPACITY:
For applications with a typical 600 Ohm source impedance such as a telephone system audio page port, a maximum of 10 Horn
Speakers may be used. Additional Horn Speakers (up to 150 maximum) will require the PRM-150 Preamplifier for correct level and
impedance matching.
SPECIFICATIONS:
Horn Speaker
Dimensions: 8-15/16"
Dia.
X
10"
D
Voice Coil Impedance: 8 Ohms
Sound
Dispersion: 110 Degrees
Frequency Response (@ Full Rated Output)
(-30dB)
Ref.
1.1kHz: 375
-
14,000Hz
Typical Sound Pressure Level (SPL-On Axis,
@ 1 Meter, @ 1.1KHz, @ Full Rated Output): SA-H5-B - 114dB
SA-H15-B
-
117dB
Amplifier
Rated Output Power: SA-H5-B - 5 Watts
SA-H15-B - 15 Watts
Audio
Input
Impedance: 600
Ohms
Nominal Sensitivity for Full Rated Output: SA-H5-B - 35mV (± 20mV)
SA-H15-B - 55mV (± 20mV)
Power
Input
Voltage: Maximum
-
26.4VDC
Nominal - 24VDC
Minimum - 21.6VDC
Maximum Input Current (@ Idle): SA-H5-B - 100mA (@ 24VDC)
SA-H15-B
-
100mA
(@
24VDC)
Maximum Input Current (@ Full Rated Output): SA-H5-B - 450mA (@ 24VDC)
SA-H15-B - 1.4A (@ 24VDC)