P82580 B
Sheet 5 of 8
MOUNTING INFORMATION:
The SA-H5-B and SA-H15-B may be wall mounted by simply using the holes in the swivel base to locate and drill mounting holes.
For ease of mounting, the swivel base may be removed from the horn body. Then mount the base to the surface with appropriate
hardware. Slots are also provided in the base for banding straps, to allow mounting to beams, poles, and girders. The mounting base
is also fully adjustable in both the vertical and horizontal planes. See Figure 10.
CAUTION:
These devices are not intended for use in hazardous locations as defined by the National Electrical Code (NEC) and
by the National Fire Protection Association (NFPA).
Mounting Base
Figure 10.
NOTE: Loosening the wing nut will allow for both pitch and rotation of the unit.
CAUTION: When adjusting horn position, be careful not to lose adjusting hardware.
An interface adapter (mounted to the horn) permits weatherproof connection. The interface adapter is threaded for standard 1/2" pipe,
and will accommodate BX cable, flexible or rigid conduit and matching connectors. If the interface adapter is not suitable for your
installation, then replace it with the clear plastic shield and 2 short mounting screws packed separately.
Figure 11.
