P84341 A
Sheet 2 of 4
MOUNTING INFORMATION:
Hang the C.O. Port Adapter vertically on the two mounting screws supplied. Space the screws vertically on 2" centers per Figure 3.
Connect all wiring as per Figure 1. The SP-COA terminals accept #16 through #24 AWG. Strip insulation to expose 3/8" of bare
wire. Press in the orange tab above the appropriate terminals with a small screwdriver and insert the bare wire into the wire hole.
Release the tab to securely clamp the wire.
Plug in AC power cord for the 24VDC power supply. Check page activation by operating the page system.
SPECIFICATIONS:
Table 1:
Input Specifications
Output Specifications
Input Voltage
24VDC
Input Current Standby
.002 Amps
Input Current Page
.049 Amps
Telephone Input Level
500mVrms
Telephone Output Level
500mVrms
Figure 2: Wire Connections
24VDC
TEL INPUT
TEL OUTPUT
-
+
-
+
-
+
Figure 3: Mounting Template
(Not To Scale)
