15
ProPress SP
Furnace Operations Manual
Press Fusing Adjust
Conventional and SP Pressing Programs
1. Select the
Special Functions
item from the Main Menu.
2. Turn the
Selector Knob
until display reads
CAL LOW FUSING.
3. Press the
Next
button.
4. Turn the
Selector Knob
to enter the number of
degrees you would like to adjust the temperature.
The display will show the current Press Fusing porcelain
calibration offset. For new furnaces this should be “0”.
If the Selector Knob is rotated clockwise note that the
“0” value changes to a positive value, and if rotated
counter-clockwise it changes to a negative value. If
you need to raise ALL of your Press Fusing program
firing temperatures by the same amount you can dial in
a positive value then press the
Next
button to accept
the offset value. Conversely, if you want to lower ALL of
your Press Fusing program firing temperatures by the
same amount, dial in a negative value and press the
Next
button to accept the offset value.
5. Press the Next button. The adjustment will be stored
and you will be returned to the main menu.
Example:
If porcelain looks under-fired, increase temperature.
If porcelain looks over-fired, decrease temperature
*
Special Functions
> Cal Press Fusing
Export Program
Import Program
Press Temp Adjust
0C
(-50C - +50C)