FIRST USE
Connect the appliance to the water system and power supply (refer to the Installation manual).
When connecting the appliance to the power supply, the display will show the temperatures preset by the
manufacturer.
If the temperature indicator appears, accompanied by the acoustic alarm (which means that the long
black-out alarm has been activated), press the alarm reset button.
Note:
After switching the appliance on, it will be necessary to wait for 2 to 3 hours before a temperature
suitable for a standard appliance load is reached.
GUIDE TO SELECTING FUNCTIONS
Stand-by
This function turns off the refrigerator and freezer compartments. To activate the
standby
function, press
the button for 3 seconds: both displays will go off and a dash will appear on the left display. To reset the
function, carry out the same procedure until the previously set temperatures are displayed.
Note:
Remember that this operation does not disconnect the appliance from the power supply.
Freezer temperature
The factory-set ideal temperature is -18°C. To change the temperature, press the
buttons until the
display shows the required value.
Refrigerator temperature
The factory-set ideal temperature is +5°C.
To change the temperature, press the
buttons until reaching the required value that it will be
displayed.
On/off
Use the
on/off
button to switch the ice maker on or off. When the ice maker is on, the display shows one
of the two
icons.
Mode
Press the
mode
button to select the type of ice desired: crushed
or cubes
.
USING THE APPLIANCE
5
Downloaded from Fridge-Manual.com Manuals
