background image

Ice and water dispenser light

The light can be switched on and off by pressing the 

button on the control panel or pressing one of

the two dispenser levers; the light will switch off automatically once the water or ice has been dispensed.

6th Sense Function 

The icon on indicates that the appliances is in the process of reaching the optimum preservation
conditions
This function will activate automatically when:
• A particularly high quantity of food to be cooled and/or frozen has been placed inside the appliance.
• The refrigerator and/or freezer door has been left open for a long time.
• There has been an extended interruption of the power supply.
The icon remains on until optimum preservation conditions are reached.

“Listeria" thermometer indicator (in some models only) 

This symbol enables the user to check that the temperature of the refrigerator is suitable to guarantee the
correct preservation of the food.
If the indicator is on, and the appliance has been in operation for at least 24 hours, the temperature inside
the refrigerator compartment is correct. If this is not the case, reduce the set temperature and wait 12
hours, before carrying out a new visual check of the indicator.

Antibacterial 

filter (if available)

This symbol shows the condition of the antibacterial filter.
When switching on the appliance for first use, the filter icon will either be off or blue. When the icon
becomes yellow, the filter life is almost exhausted and the filter cartridge will need replacing shortly.
When the icon becomes red it is time to replace the filter.
Replace the cartridge and press the 

Alarm reset

button until the icon goes off or becomes blue.

00800-40088400 - www.whirlpool.eu/myfridge.

Water filter 

(if available)

This symbol indicates the state of the water filter.
The filter symbol is blue (green on some models) on new products. When the icon becomes yellow, the
filter life is almost exhausted and the filter cartridge will need replacing shortly.
When the icon becomes red, the filter will be replaced.
After replacing the filter cartridge, press the 

Filter Reset

button, until the icon becomes blue (or green).

The 

Filter Reset

button will not work if the filter icon is already blue (or green).

00800-40088400 - www.whirlpool.eu/myfridge.

Control panel lock function

This function prevents accidental changing of appliance settings or switching off.
The panel can be locked by pressing both the fast freeze 

button on the left of the panel and the

vacation 

button on the right of the panel at the same time, for about 3 seconds: the 

symbol will

come on and an acoustic alarm will indicate activation of the function.
To deactivate the function, carry out the same procedure until the symbol goes off.

Automatic ice-maker control panel lock

This function consists of deactivating ice and water dispensing for easier cleaning or to prevent
unintentional use.
It is set by pressing the 

Child Lock

button for 3 seconds until the symbol 

e lights up; an acoustic

signal confirms activation.
To deactivate the function, carry out the same procedure until the symbol goes off.

Note:

This function does not disconnect the power to the appliance, ice-maker or light, but simply

deactivates the dispenser levers.

6

Downloaded from Fridge-Manual.com Manuals

Summary of Contents for 20RI-D4

Page 1: ...Door trays K 2 litre door tray with bottle holder L 0 75 litre door tray M Water filter depending on model N Multiflow depending on model O Bottle rack if available P Fresh food compartment if available FREEZER COMPARTMENT Q Automatic ice maker R Glass shelves Racks depending on the model S Drawer Bottom basket depending on the model T Drawer Top basket depending on the model U Ice cube drawer V F...

Page 2: ...s the button for 3 seconds both displays will go off and a dash will appear on the left display To reset the function carry out the same procedure until the previously set temperatures are displayed Note Remember that this operation does not disconnect the appliance from the power supply Freezer temperature The factory set ideal temperature is 18 C To change the temperature press the buttons until...

Page 3: ...red it is time to replace the filter Replace the cartridge and press the Alarm reset button until the icon goes off or becomes blue 00800 40088400 www whirlpool eu myfridge Water filter if available This symbol indicates the state of the water filter The filter symbol is blue green on some models on new products When the icon becomes yellow the filter life is almost exhausted and the filter cartri...

Page 4: ...rn the user of the current operating condition The ECO function disables the control panel and its warning signals To reinstate normal operating condition repeat the same operation until the display shows the previously set temperatures ALARMS In the event of an alarm the acoustic alarm and indicator lights are activated Important To disable the acoustic signal press the Alarm Reset button Black o...

Reviews: