background image

3

WASHER SAFETY

You can be killed or seriously injured if you don't
immediately follow instructions.

You can be killed or seriously injured if you don't
follow instructions.

All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you
what can happen if the instructions are not followed.

Your safety and the safety of others are very important.

We have provided many important safety messages in this manual and on your appliance. Always read and obey all
safety messages.

This is the safety alert symbol.

This symbol alerts you to potential hazards that can kill or hurt you and others.

All safety messages will follow the safety alert symbol and either the word “DANGER” or
“WARNING.” These words mean:

IMPORTANT SAFETY INSTRUCTIONS

SAVE THESE INSTRUCTIONS

■  

Read all instructions before using the washer.

 

Do not wash articles that have been previously

 

cleaned in, washed in, soaked in, or spotted with 
gasoline, dry-cleaning solvents, other flammable, 
or explosive substances as they give off vapors 
that could ignite or explode.

■  

Do not add gasoline, dry-cleaning solvents, or 

other flammable, or explosive substances to the 
wash water. These substances give off vapors 
that could ignite or explode.

 

Under certain conditions, hydrogen gas may be 

produced in a hot water system that has not been 
used for 2 weeks or more. HYDROGEN GAS IS 
EXPLOSIVE. If the hot water system has not 
been used for such a period, before using the 
washing machine, turn on all hot water faucets 
and let the water flow from each for several 
minutes. This will release any accumulated 
hydrogen gas. As the gas is flammable, do not 
smoke or use an open flame during this time.

 

Do not allow children to play on or in the washer. Close 

supervision of children is necessary when the washer is 
used near children.

 

Before the washer is removed from service or 

 

 

Do not reach into the washer if the drum, tub or agitator 

is moving.

 

Do not install or store the washer where it will be 

exposed to the weather.

 

Do not tamper with controls.

 

Do not repair or replace any part of the washer or 

attempt any servicing unless specifically recommended 
in this manual or in published user-repair instructions 

   that you understand and have the skills to carry out.

 

See “Electrical Requirements” for grounding instructions.

WARNING:

 

To reduce the risk of fire, electric shock, or injury to persons when using the washer, follow basic 

precautions, including the following:

discarded, 

remove the door or lid.

Summary of Contents for 3953950A













Reviews: