6
3. Remove the front panel from the air conditioner and set
aside.
4. Remove the shipping lock bracket and screw from the air
conditioner and set aside.
5. Remove the ground screw and ground wire from the front of
the air conditioner. Save the ground screw.
6. Pull on the handles to slide the air conditioner out of the
cabinet. Place the air conditioner on cardboard.
NOTE: Do not lift, push, pull or remove any expanded
polystyrene (foam) from inside the air conditioner. It is not
packing material.
Window Installation
(on some models)
NOTES:
■
Handle the air conditioner gently.
■
Be sure your air conditioner cabinet does not fall out of the
opening during installation or removal.
■
The location where the power cord exits the air conditioner
should be no more than 4 ft (122 cm) from a grounded
3 prong outlet.
■
Do not block the louvers on the front panel.
■
Do not block the louvers on the outside of the air conditioner.
Attach Top Channel
NOTE: Attach the top channel and the side curtains to the air
conditioner cabinet before placing the cabinet in the window.
1. Locate the bag of screws provided.
2. Place the top channel on top of the air conditioner cabinet,
lining up the 4 holes in the top channel with the 4 holes on top
of the air conditioner cabinet.
3. Using 4 - #10 x
³⁄₈
" washer-head Phillips thread-cutting
screws, attach the top channel to the air conditioner cabinet.
A. Shipping lock bracket screw
B. Shipping lock bracket
A. Green ground wire
B. Ground screw
A
B
A
B
A. Handles
A
A. Top channel
B. #10 x
³⁄₈
" washer-head Phillips thread-cutting screws
A
B
