8
3. Repeat for the left side. Adjust the cabinet until the distance
on each side is the same.
4. Use a
³⁄₃₂
" drill bit to drill 4 starter holes
³⁄₈
" deep through the
4 holes in the cabinet and into the windowsill.
5. Attach cabinet to windowsill with 4 - #10 x
¹⁄₂
" pan-head
Phillips screws.
6. Check that air conditioner cabinet is tilted to the outside so
that water will run to the outside.
Attach Side Curtains to Window Frame
1. Pull the left-hand curtain out until it fits into the window
channel. Use a
³⁄₃₂
" drill bit to drill a starter hole through the
hole in the curtain housing and into the lower window sash.
Front View
Top View
2. Insert one of the #10 x
³⁄₄
" round-head screws through the
hole in the top of the curtain.
3. Insert one of the #10 x
³⁄₄
" round-head screws through the
slotted hole in the bottom of the curtain.
4. Repeat for the right-hand curtain.
Attach Support Brackets
1. Attach the support bracket to the cabinet by aligning the
holes in the bracket with the holes in the cabinet.
A. Window sash
B. Empty cabinet
C. Window channel
A. #10 x
¹⁄₂
" pan-head Phillips screws
B. Windowsill
B
A
C
A
A
B
A. Window channel
B. Left-hand curtain
C. #10 x
³⁄₄
" round-head screw
A. #10 x
³⁄₄
" round-head screw
B. Slotted hole in the bottom of the curtain
A. Holes in cabinet and support bracket
A
B
C
A
B
A
