4
•
The dryer is not designed for built-in installation.
•
The dryer can be installed under a worktop,
provided that adequate ventilation of the dryer is
assured. Install a ventilation grid (minimum 45 cm x 8
cm), in the rear part of the worktop under which the
dryer is installed.
4. Assembly of distance holders
To ensure that the appliance is positioned at a correct
distance from the wall at the rear side and to allow
sufficient ventilation, distance holders must be mounted
on the rear side of the dryer before starting the first
drying cycle.
A. Remove the two distance holders from the packaging.
B. The distance holders must be inserted on the rear
side of the dryer in the protective cover.
C. Insert the distance holders in the holes provided on
both sides.
D. Secure both distance holders by turning them in a
clockwise direction as far as the stop position.
5. User and child protection
•
Children must not be allowed to play with the dryer.
•
Ensure that children and small animals cannot get into
the drum.
•
Keep the packaging materials (plastic bags,
polystyrene parts, etc.) out of reach of children, as
they are potentially dangerous.
•
The appliance is not intended for use by persons
(including children) with reduced physical, sensory or
mental capabilities, or lack of experience and
knowledge, unless they have been given supervision
or instruction concerning use of the appliance by a
person responsible for their safety. Children should
be supervised to ensure that they do not play with
the appliance.
Stacking kit
•
Depending on the
model, your dryer can
be stacked on top of
your front loading
washing machine. For
further information
please contact the
After-Sales Service.
B
C
D
Summary of Contents for 7570
Page 1: ...1 ...
