Page 4
Installation steps
1.
Put on safety glasses and gloves. Do Not
use oven door handle to lift or move the range.
Preparation
A
2.
Remove oven racks and parts package
from inside oven. Remove shipping materials,
tape and protective film from range.
Anti-tip bracket installation
B
Contact a qualified floor covering installer for
the best procedure for drilling mounting
holes through your type floor covering.
4.
Use the anti-tip bracket
template/instruction sheet to install the
anti-tip bracket.
Anti-tip bracket must be
anchored securely to the sub
floor.
Depending on the
thickness of your
flooring, longer
screws may be
needed to anchor
the bracket
to the sub floor.
Longer screws are
available from your
local hardware store.
CLOCK
8.8:88
TIMER
TIMER
B
E
Check cooktop
burners for
proper flame
D
Replace or close
broiler drawer.
(Roll-out broiler drawer
shown is available on
some models.)
C
Secure range
with anti-tip
bracket
Remove oven
racks and parts
package.
A
Remove shipping
material.
C
Level range
D
Make proper
gas
connection
D
Plug power
supply cord
into grounded
outlet
E
Check burner
operation
Install anti-
tip bracket
3.
Keep cardboard shipping base under
range to prevent damage to floor covering.
cardboard
shipping base
Excessive Weight Hazard
Use two or more people to move and
install range.
Failure to follow this instruction can
result in back or other injury.
WARNING
Tip Over Hazard
A child or adult can tip the range and be
killed.
Connect anti-tip bracket to rear range
foot.
Reconnect the anti-tip bracket, if the
range is moved.
Failure to follow these instructions can
result in death or serious burns to
children and adults.
WARNING
