4
0"*
0"*
18"
* Wall, door and floor molding may require
additional spacing.
Recessed area
installation
Closet/confined area
installation
3"
3"
24 sq.in.**
Front view
1"
closet door
** Minimum top and bottom air openings for
closet door.
*** External exhaust elbow requires
recommended spacing.
Side view
14"
max.
spacing
5" is recommended ***
4" is minimum
• A clothes dryer produces
combustible lint and must be
exhausted outdoors.
• If codes permit, dryer may be
installed in a recessed area or closet
using dimensions shown.
• Dimensions are in inches and are the
minimum allowable.
• Additional spacing should be
considered for ease of installation
and servicing. Companion appliance
spacing should also be considered.
Installation clearances.
Use recommended clearance for
easier installation.
If a closet door is installed: The
minimum unobstructed air openings
are required. Louvered doors with
equivalent air openings are
acceptable.
Installation clearances.
Use recommended clearance for
easier installation.
Dryer dimensions
*Dimensions shown with feet
extended 1"
from bottom of dryer.
Most installations will require
at least 5" clearance behind
the dryer for the dryer vent.
Front view
48 sq.in.**
WARNING — To reduce the risk of fire
this appliance MUST BE EXHAUSTED
OUTDOORS
Back
Sides
Top
Front
5"/4"
1"/0"
18"/18"
1"/1"
Recommended/minimum
Back
Sides
Top
Front
5"/0"
1"/0"
18"/18"
—
Recommended/minimum
Door clearance
dimensions
15-1/4"
15-1/4"
8-1/4 "
15-1/4"
7"
17-3/4"
13-3/4"
25-5/8"
8-3/4"
13-3/4"
Location must be large enough to fully
open dryer door.
Extra-large
hamper door
22-3/4"
22-3/4"
22-3/4"
22-3/4"
3-7/8"
19-1/8"
Super-large side swing door
(reversible)
Large side swing door
(reversible)
Small side swing door
2-1/8"
gas burner inlet
pipe connection
at rear of dryer
dryer
exhaust
vent
42-3/8"*
14-1/2"
28" max.
29"
9-1/4"
6"*
