BEFORE USING THE APPLIANCE
1. Packing
The packing material is completely recyclable, and is
marked with the recycling symbol , which identifies it
as a type of material that must be sent to local waste-
disposal centres.
2. Product
This appliance is marked in compliance with European
Directive 2002/96/EC on Waste Electrical and Electronic
Equipment (WEEE).
By ensuring that this appliance is correctly scrapped,
the user can help prevent potentially harmful
consequences for the environment and the health of
people.
The symbol on the appliance or accompanying
documentation indicates that this product must not be
treated as household waste, but must be taken to a
collection centre for the recycling of electrical and
electronic appliances.
Disposal must be carried out in accordance with the
local environmental regulations on waste disposal.
For more detailed information about the treatment,
recovery and recycling of this product, please contact
your competent local authority, the household waste
collection service or the shop where you purchased the
appliance.
• Remove the accessories from the oven and heat it at
200°C for about two hours to eliminate the smell of
protective grease and insulating materials. Keep the
window open during this operation.
• Before use, remove:
- stickers located on the front of the appliance and on
the oven door, except the dataplate;
- cardboard protection and protective plastic film on the
control panel and other parts of the appliance;
-any stickers on the accessories
(e.g. under the drip-tray).
Oven minimum flame adjustment
Light the oven burner at max. setting.
Close the door. Turn the knob to min. After approx. 20 minutes (at
least to obtain first activation of the thermostat), proceed as follows:
remove the oven knob and insert a small screwdriver under the
thermostat, as shown in the figure.
Turn the adjustment screw clockwise to increase the flame and
anticlockwise to decrease it. For correct setting, make sure the flame
height is 3/4 mm.
